Bianca Care Basin Mixer Matte Black
$396.00 inc.GST
- 1 Compliant Design
- Matte Black Finish
- Flat Extended Lever
- 6-Star WELS Rated
- 15-Year Warranty
Description
Matte black accessible tapware is almost non-existent. Most compliant basin mixers arrive in chrome or white — practical defaults that say nothing about the bathroom they’re going into. The Bianca Care Basin Mixer Matte Black fills that gap directly.
A 15-year warranty and AS1428.1 certification are the two credentials that matter most for permanent accessible bathroom installations. This black mixer tap carries both. The compliance rating covers public spaces, assisted living facilities, and private homes, adapting for changing mobility needs — without requiring a chrome finish as part of the deal.
The flat extended lever operates on a wide arc with minimal resistance. Push it sideways with a palm, nudge it with a wrist, or use the back of a hand — it moves. That’s the practical reality of designing lever taps for the elderly and anyone managing reduced grip strength day-to-day. The matte black surface conceals minor marks between cleans and holds its depth without polishing — low maintenance by design.
Low-lead DZR brass resists dezincification under Australian water conditions and remains safe for drinking-water contact over the building’s lifetime. The NEOPERL aerator runs smooth and splash-free. Rust-resistant polyamide braided PEX hoses connect to mains pressure between 150 and 500kpa across a temperature range of 1°C to 75°C.
Water efficiency sits at 6 stars WELS — 4.5 litres per minute (Registration T40947). WaterMark certification (Licence WM-060073) confirms Australian plumbing compliance. The finish coordinates with black tapware across the Bianca range. Perth builders and designers working on accessible renovations can request delivery across the metro area.
For homeowners exploring accessible basin mixers in Perth, the Bianca Care Basin Mixer Matte Black is one of a kind.
Check out our Basin Mixer Buying Guide to decide if a sensor tap is the best fit for your basin. And don’t forget to purchase a basin waste to go with your new tap!
FEATURES & BENEFITS
- Matte Black Finish: Non-reflective surface conceals marks between cleans — no polishing required to maintain appearance
- 1 Certified: Meets Australian accessibility standards for private, assisted living, and public bathroom installation
- Flat Extended Lever: Wide-arc operation by palm or wrist — removes grip dependency for arthritis sufferers and elderly users
- DZR Brass Construction: Dezincification-resistant body stays structurally sound and drinking-water safe over the long term
- 6-Star WELS Rating:5L/min (Registration T40947) — top-tier water efficiency for high-frequency daily bathroom use
- 1°C–75°C Rated: Full temperature range suits all seasonal variation and individual user preference requirements
- 150–500kpa Pressure Range: Operates reliably across standard Australian residential and commercial mains pressure
- NEOPERL Aerator: Smooth, splash-free flow keeps the basin area tidy during assisted and independent daily use
- Braided PEX Hoses: Rust-resistant polyamide construction maintains reliable plumbing connections under daily demand
- WaterMark Certified: Licence WM-060073 confirms verified compliance with Australian plumbing installation requirements
- 15-Year Warranty: Backs every unit going into a permanent accessible or standard bathroom installation
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
Reviews
There are no reviews yet