Bianca Mid Tall Basin Mixer Brushed Gold
$484.00 inc.GST
- Solid Brass Construction
- Brushed Gold Finish
- 5-Star WELS Rated
- 25mm Ceramic Cartridge
- 15-Year Warranty
Description
Warm tones and clean geometry rarely come in the same package — but Ross’s Discount Home Centre’s Basin Mixer range delivers both with the Bianca Mid Tall Basin Mixer Brushed Gold. Part of the Bianca tapware range, this mixer is designed for above-counter basins where height and visual presence matter as much as performance.
The brushed gold finish gives this basin mixer tap its character. The angular silhouette and square base plate sit cleanly against tiled walls and stone benchtops, pairing naturally with other brushed gold tapware and bathroom accessories for a cohesive finish. The easy-grip modular handle sits flush with the body and operates with a single smooth motion.
Beneath the finish, solid brass construction provides the structural backbone. The 25mm ceramic disc cartridge controls temperature and flow with precision — adjustable across a rated range of 1°C to 75°C to suit seasonal variation and personal preference while reducing energy use. A NEOPERL aerator delivers a consistent, splash-free stream at the spout. Polyamide PEX flexible hoses with 1/2 BSP female fittings connect to mains pressure supply within the rated range of 150–500kpa.
Water efficiency is rated at 6 stars WELS — consuming just 4.5 litres per minute (WELS Registration T40947). WaterMark certification (Licence WM-060073) confirms compliance with Australian plumbing standards. This bathroom basin tap suits contemporary, minimal, and designer bathroom styles equally well.
For homeowners exploring basin mixers in Perth, the Bianca Mid Tall Basin Mixer Brushed Gold is backed by a 15-year warranty for long-term peace of mind.
Check out our Basin Mixer Buying Guide to decide if a sensor tap is the best fit for your basin. And don’t forget to purchase a basin waste to go with your new tap!
FEATURES & BENEFITS
- Brushed Gold Finish: Warm, angular profile pairs naturally with gold bathroom accessories and stone benchtops
- Solid Brass Construction: Dense brass body resists corrosion and supports long-term structural durability
- Tall Spout Height: Designed specifically for above-counter basins requiring additional clearance at the spout
- 6-Star WELS Rating:5L/min flow rate reduces water consumption without sacrificing usable pressure
- 25mm Ceramic Cartridge: Precise temperature control across 1°C–75°C with adjustable flow to reduce energy use.
- Mains Pressure Rated: Operates reliably between 150–500kpa for standard Australian mains pressure installations
- NEOPERL Aerator: Slim stream flow director delivers a consistent, splash-free stream at the spout
- PEX Flexible Hoses: 1/2 BSP female fittings connect cleanly to standard Australian plumbing configurations
- WaterMark Certified: Licence WM-060073 confirms compliance with Australian residential plumbing standards
- Bianca Range Compatible: Coordinates with other Bianca tapware pieces for a consistent bathroom aesthetic
- 15-Year Warranty: Long-term coverage provides strong purchase confidence for a premium bathroom investment
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
Reviews
There are no reviews yet