Bianca Shower Mixer With Diverter Separate Plate Matte Black
$154.00 inc.GST
- Matte Black Separate Plate
- Quarter-Turn Diverter Default Bath
- Adjustable Ceramic Cartridge
- Brass Lug Wall Mounting
- 15-Year Warranty
Description
Installation is where this mixer earns its place. Brass lugs built into the body make wall mounting accurate and secure — no guesswork, no shifting during fixing. The Bianca Shower Mixer With Diverter Separate Plate Matte Black from Nero Tapware’s Bianca range is designed for bathrooms where the shower and bath share a single-wall connection, featuring a quarter-turn diverter that defaults to the bath spout and redirects flow to the shower with a single clean turn.
The separate metal wall-plate construction is designed for longevity. It keeps the profile clean against the wall while the brass-lug mounting system behind it handles the structural load. Black tapware works in both directions here — the flat matte finish sits as naturally in a minimal white bathroom as it does in a dark, moody scheme. Water spots and smudging that show immediately on chrome are far less visible on matte black, which keeps the mixer looking sharp between cleans.
The 35mm ceramic cartridge controls temperature and flow and can be adjusted to reduce the maximum water temperature — a practical setting for households with children or where energy savings matter. The 1/2 BSP female body inlets suit standard mains pressure installation rated between 150 and 500kpa, across a temperature range of 1°C to 75°C. WaterMark certification confirms compliance with Australian plumbing standards under licence WM-060073.
For anyone comparing a shower mixer with diverter in Perth, the Bianca Shower Mixer With Diverter Separate Plate Matte Black is a considered option in Ross’s range of bath shower mixers — built to last, covered by a 15-year warranty.
Read our Shower Tapware Buying Guide to discover if a bath/shower mixer is the right choice for your bathing space.
FEATURES & BENEFITS
- Matte Black Finish: Non-reflective surface resists visible water spots and smudging between cleans
- Metal Wall Plate Construction: Durable separate plate builds longevity into the wall-facing components, not just the body
- Brass Lug Mounting System: Integrated lugs provide accurate, secure wall fixing without movement during installation
- 35mm Ceramic Cartridge: Adjustable temperature and flow control — set a lower maximum to reduce energy use
- Quarter-Turn Diverter: Defaults to bath spout; redirects to shower with one clean turn — no mid-shower fumbling
- 1/2 BSP Female Inlets: Standard body inlets connect directly to mains pressure plumbing without adapters
- Mains Pressure Rated: 150–500kpa pressure range suits standard Australian residential installations throughout
- Temperature Compatible: Rated 1°C–75°C — covers all Australian hot water system outputs and seasonal variation
- WaterMark Certified: Licence WM-060073 confirms verified compliance with Australian plumbing installation standards
- Black Tapware Versatility: Flat matte finish integrates cleanly into both light and dark bathroom colour schemes
- 15-Year Warranty: Long-term coverage reflects the quality of materials and construction throughout the Bianca range
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
