Mecca Brushed Gold Basin Mixer
$341.00 inc.GST
- Standard-height single-lever mixer
- Model NR221901BG, brushed gold
- WELS registration number T43208
- Aerated 5L per minute flow
- Dezincification-resistant brass build
Description
Standard height is the right call more often than people expect. At 157.55mm tall with a 124.5mm spout reach, the Mecca Brushed Gold Basin Mixer sits at the height that suits inset, drop-in and under-mount basins, where a taller spout would drop water too far and splash. Ross’s range of basin mixers carries both heights, so the shape of your basin decides which one you need.
Gold warms a room that tile and stone tend to cool down. The finish here is brushed rather than polished, which keeps fingerprints and water marks less obvious on this brushed gold basin mixer. It matches other brushed gold tapware in the Mecca tapware range if the rest of the bathroom tapware is going the same way.
The 25mm ceramic disc cartridge can be adjusted to set temperature and flow, and a NEOPERL slim aerator with stream director holds output to 5 litres per minute for a 5-star WELS rating under registration T43208. Lead-free DZR brass forms the body, with polyamide PEX flexible hoses and 1/2″ BSP female fittings for mains pressure installation.
For anyone comparing basin mixers in Perth, the Mecca Brushed Gold Basin Mixer is WaterMark approved and carries a 15-year warranty.
Check out our Basin Mixer Buying Guide to decide if a mixer tap is the best fit for your basin. And don’t forget to purchase a basin waste to go with your new tap!
FEATURES & BENEFITS
- Standard 157.55mm Height: Suits inset, drop-in and under-mount basins without splashing.
- 124.5mm Spout Reach: Puts water over the drain rather than the rim.
- Adjustable Ceramic Cartridge: Set temperature and flow limits to save energy.
- Brushed Gold Finish: Warm tone that shows fingerprints less than polished gold.
- Lead-Free DZR Brass: Solid construction that resists corrosion for long service life.
- NEOPERL Slim Aerator: Stream director softens flow and cuts splash in shallow bowls.
- 5-Star WELS Rating: Just 5L per minute, easing water and heating costs.
- Polyamide PEX Hoses: Standard 1/2″ BSP fittings suit mains pressure installation.
- WaterMark Approved: Meets Australian plumbing standards for compliant bathroom work.
- 15-Year Warranty: Long-term cover on a tap used every day.
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only
-7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware |
15 years | -15 years Replacement Cartridge only
-7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes.
Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories |
1 year | -1-year Replacement products or parts only |
| Other Accessories |
10 years | -10 years on universal pop up waste replacement only
-1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
Reviews
There are no reviews yet