Bianca Fixed Bath Spout Only 200mm Chrome
$185.00 inc.GST
- Cast DZR Brass Construction
- Polished Chrome Finish
- 200mm Compact Reach
- Suits Bath and Basin applications
- 15-Year Warranty
Description
Chrome has stayed relevant in bathroom design for longer than any other finish — not because it’s fashionable, but because it’s genuinely versatile. The Bianca Fixed Bath Spout Only 200mm Chrome from Ross’s range of premium bath taps brings that reliability to wall-mounted spout form, giving Perth renovators a chrome spout that works equally well above a freestanding bath or as a wall-mounted basin spout without looking out of place in either setting.
The polished surface catches light cleanly and holds its appearance between cleans with nothing more than a quick wipe. Against white, grey, or neutral bathroom palettes, the chrome tapware finish simply works — no styling effort required, no clashing with surrounding fixtures. The rectangular body extends 200mm from the round wall rose, tapering gently toward a softened outlet that keeps the profile refined without being fussy. It’s a spout that earns its place through restraint rather than decoration.
There are no controls built into the body. Temperature and flow are managed entirely by the paired wall top assembly or wall mixer, keeping the spout body free of hardware and visually clean. The 1/2 BSP female push fit inlet connects to standard configurations without adapters, rated between 150 and 500 kPa across a temperature range of 1°C to 75°C.
Cast lead-free DZR brass handles Australian water conditions reliably over the long term, resisting dezincification without affecting water quality. The Bianca Fixed Bath Spout Only 200mm Chrome coordinates with chrome tapware across the Bianca range — bath, basin, and shower can all carry the same finish from a single source. Perth metro delivery is available, and a 15-year warranty backs every unit.
Check out our Bathroom Tapware Buying Guide and the Pros & Cons of wall-mounted bathroom taps to determine if a wall-mounted bath spout is the right fit for your bathroom.
FEATURES & BENEFITS
- Polished Chrome Finish: High-reflectivity surface stays clean with minimal effort and suits any bathroom palette
- Cast DZR Brass Body: Lead-free dezincification-resistant construction maintains integrity in Australian water conditions long term
- 200mm Compact Reach: Versatile projection suits both bath and wall-mounted basin applications comfortably
- Square Spout Profile: Rectangular body with softened outlet balances contemporary geometry with refined detailing
- Wall-Mount Installation: Round wall rose sits flush against the surface — no exposed pipework, clean result
- 1/2 BSP Push Fit Inlet: Standard connection suits wall top assemblies and wall-mounted mixers without adapters
- Passive Spout Design: No internal controls — temperature and flow managed entirely by the paired wall mixer
- 150–500kpa Pressure Rated: Reliable across standard Australian residential mains pressure in all installation types
- 1°C–75°C Temperature Range: Full rating covers all Australian hot water systems and seasonal variation
- WaterMark Certified: Licence WM-060073 confirms verified compliance with Australian plumbing installation standards
- 15-Year Warranty: Long-term coverage reflects the quality of cast DZR brass construction throughout
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
Reviews
There are no reviews yet