Bianca Fixed Bath Spout Only 200mm Gunmetal
$286.00 inc.GST
- Cast DZR Brass Construction
- Gunmetal Dark Finish
- 200mm Versatile Reach
- Suits Bath and Basin applications
- 15-Year Warranty
Description
Creating a dark bathroom scheme around a single consistent finish is harder than it looks — most gunmetal tapware ranges stop at the basin, leaving the bath as an afterthought. The Bianca Fixed Bath Spout Only 200mm Gunmetal from Ross’s premium bath tapware range closes that gap, giving Perth renovators a gunmetal spout that carries the finish through to the bath or vanity wall without compromise.
Cast lead-free DZR brass forms the structural core — dezincification-resistant, safe for drinking water contact, and built to hold its form in Australian water conditions over the long term. The gunmetal tapware finish sits over that foundation with a depth that polished surfaces can’t replicate. It absorbs light rather than throwing it back, which means it reads consistently whether the bathroom is naturally lit or artificially lit — a quality that matters more in dark schemes than buyers typically anticipate.
At 200mm, this wall-mounted bath or basin spout sits in a practical middle ground — enough reach for a freestanding bath, compact enough for a wall-hung basin where projection needs to stay controlled. The spout body carries no internal controls; temperature and flow are managed entirely by the paired wall mixer or wall top assembly, keeping the gunmetal spout body free of hardware. The 1/2 BSP female push fit inlet connects to standard configurations rated between 150 and 500kpa across 1°C to 75°C.
The Bianca Fixed Bath Spout Only 200mm Gunmetal coordinates with gunmetal tapware across the Bianca range — basin, shower, and bath in one unified finish. Perth metro delivery available. Fifteen-year warranty included.
Check out our Bathroom Tapware Buying Guide and the Pros & Cons of wall-mounted bathroom taps to determine if a wall-mounted bath spout is the right fit for your bathroom.
FEATURES & BENEFITS
- Gunmetal Dark Finish: Absorbs light consistently under natural and artificial lighting — ideal for dark bathroom schemes
- Cast DZR Brass Body: Lead-free dezincification-resistant construction stays safe for drinking water in Australian conditions
- 200mm Versatile Reach: Suits freestanding bath and wall-mounted basin installations with controlled spout projection
- Square Spout Profile: Rectangular geometry with softened outlet complements dark tiles, stone, and concrete surfaces
- Wall-Mount Installation: Round wall rose mounts flush — no exposed pipework, minimal profile against the wall surface
- 1/2 BSP Push Fit Inlet: Standard connection suits wall top assemblies and wall-mounted mixers without adapters
- Passive Spout Design: No internal controls — temperature and flow managed entirely by the paired wall mixer
- 150–500kpa Pressure Rated: Reliable across standard Australian residential mains pressure in all installation types
- 1°C–75°C Temperature Range: Full rating covers all Australian hot water systems and seasonal temperature variation
- WaterMark Certified: Licence WM-060073 confirms verified compliance with Australian plumbing installation standards
- 15-Year Warranty: Long-term backing reflects genuine confidence in cast DZR brass materials and build quality
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
Reviews
There are no reviews yet