Bianca Fixed Bath Spout Only 240mm Gunmetal
$308.00 inc.GST
- Cast DZR Brass Construction
- Gunmetal Finish
- 240mm Wall-Mount Spout
- 1/2 BSP Push Fit Connection
- 15-Year Warranty
Description
Choosing gunmetal for bath tapware is a deliberate decision. It rules out safe finishes and commits to a scheme — and that commitment pays off when the rest of the bathroom is built around dark, considered materials. The Bianca Fixed Bath Spout Only 240mm Gunmetal sits in Ross’s bath tap range as the dark finish option for buyers who want gunmetal tapware carried through to the bath wall, not just the vanity.
The gunmetal bath tap has a particular quality that polished finishes lack — it holds its depth under direct light rather than reflecting it back into the room. Paired with a gunmetal wall-mounted mixer or wall top assembly from Nero’s Bianca range, this wall-mounted bath spout creates a unified finish across the entire bath setting. The square-profile body runs 240mm from the round wall rose to the softened outlet — enough reach to fill cleanly without water contacting the tile surface.
Installation connects via 1/2 BSP female push fit inlet, compatible with standard wall top assemblies and wall-mounted mixers. This is passive bath tapware — no cartridge, no controls. The paired mixer handles temperature and flow, which is why the spout body stays clean and uninterrupted on the wall. Pressure is rated between 150 and 500kpa across a temperature range of 1°C to 75°C.
Cast lead-free DZR brass handles Australian water conditions without dezincification, compromising the body over time. For homeowners comparing gunmetal bath taps in Perth, the Bianca Fixed Bath Spout Only 240mm Gunmetal is available with metro delivery and backed by a 15-year warranty.
Check out our Bathroom Tapware Buying Guide and the Pros & Cons of wall-mounted bathroom taps to determine if a wall-mounted bath spout is the right fit for your bathroom.
FEATURES & BENEFITS
- Gunmetal Dark Finish: Absorbs light rather than reflecting — purpose-built for dark and moody bathroom schemes
- Cast DZR Brass Body: Lead-free dezincification-resistant construction handles Australian water conditions long term
- 240mm Spout Reach: Clears the bath rim cleanly — water drops directly without running back down the wall
- Square Spout Profile: Rectangular geometry with softened outlet suits contemporary and architectural bathroom styles
- Wall-Mount Installation: Round wall rose mounts flush — clean minimal profile with no exposed pipework visible
- 1/2 BSP Push Fit: Standard inlet connects to wall top assemblies and wall-mounted mixers without adapters
- Passive Spout Design: No cartridge or controls — temperature and flow managed entirely by the paired mixer
- 150–500kpa Pressure Rated: Operates reliably across standard Australian residential mains pressure installations
- 1°C–75°C Temperature Range: Full rating covers all seasonal and hot water system variations across Australian homes
- WaterMark Certified: Licence WM-060073 confirms compliance with Australian plumbing installation standards
- 15-Year Warranty: Long-term coverage reflects the quality of cast DZR brass construction throughout
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
Reviews
There are no reviews yet