Bianca Wall Basin-Bath Mixer Separate Back Plate 230mm Brushed Gold
$605.00 inc.GST
- 230mm Extended Spout Reach
- Brushed Gold Separate Roses
- 6-Star WELS 4.5L/min
- Replaceable Trim Kits
- 15-Year Warranty
Description
Spout length is a decision that affects how a wall-mounted basin mixer or bath mixer tap sits in a bathroom. At 230mm, the Bianca Wall Basin-Bath Mixer Separate Back Plate 230mm Brushed Gold offers greater reach than the 187mm version, making it better suited to wider basins and freestanding baths where a shorter spout would fall short of the centre. Available in Ross’s range of Wall Taps and Mixers, it mounts on individual round roses rather than a single integrated back plate, keeping the profile light against the wall.
Brushed gold tapware brings warmth without the high-maintenance shine of polished gold. The satin surface diffuses light evenly and sits naturally alongside stone benchtops, timber cabinetry, and warm-toned tiles. The solid lead-free brass body connects via 1/2 BSP female inlets for mains pressure installation, rated at 150 to 500 kPa from 1°C to 75°C. The 35mm ceramic disc cartridge adjusts temperature and flow with a settable maximum. Trim kits are replaceable independently of the body. A non-restricting aerator is included for bath use.
Water efficiency is certified at 6-star WELS, the highest rating available, delivering 4.5L/min. WaterMark certification confirms that this wall tap and mixer set meets mandatory Australian plumbing compliance standards. For anyone comparing wall taps and mixers in Perth, the Bianca Wall Basin-Bath Mixer Separate Back Plate 230mm Brushed Gold is a long-term choice backed by a 15-year warranty.
Explore the full Bianca tapware range for matching brushed gold options to coordinate throughout the bathroom.
Read our Bathroom Tapware Buying Guide and the Pros & Cons of wall-mounted bathroom taps to determine if a wall-mounted mixer tap is the right fit for your bathroom.
FEATURES & BENEFITS
- Brushed Gold Finish: Satin surface diffuses light warmly, suits stone, timber, and warm-toned bathroom palettes
- 230mm Extended Spout: Greater reach suits wider basins and freestanding baths where shorter spouts fall short
- Separate Back Plate Design: Individual round roses for body and spout keep the wall profile light and uncluttered
- Lead-Free Brass Body: Solid brass construction stays structurally sound and drinking-water safe in Australian conditions
- 35mm Ceramic Cartridge: Adjustable temperature and flow with settable maximum for energy saving or child safety
- Replaceable Trim Kits: Visible components update independently of the body, extending the mixer’s useful life
- Non-Restricting Bath Aerator: Included for bath use, delivering full flow without additional purchases
- 6-Star WELS Rating: Top-tier water efficiency certified at 4.5L/min for a high-use basin and bath mixer
- WaterMark Certified: Licence WM-060073 confirms compliance with mandatory Australian plumbing installation standards
- Mains Pressure Compatible: Rated 150 to 500kpa and 1°C to 75°C, suits standard Australian residential plumbing
- 15-Year Warranty: Long-term coverage reflects confidence in solid brass construction and ceramic cartridge quality
Spec Sheet
Warranty
| Category | Warranty Period | Warranty Details |
|---|---|---|
| Mixer Taps | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Pearl & Kara tapware | 15 years | -15 years Replacement Cartridge only -7 years Replacement products or parts on all finishes -1-year Replacement products or parts & Labour |
| Showers | 10 years | -10 years Replacement products or parts on chrome finishes. Note: Metal Shower hoses only have 5 years replacement warranty -10 years Replacement products or parts on other finishes -1-year replacement products or parts & Labour |
| Bath Outlets | 10 years | -10 years replacement products or parts only on all finish |
| Bathroom Accessories | 1 year | -1-year Replacement products or parts only |
| Other Accessories | 10 years | -10 years on universal pop up waste replacement only -1 year on bottle trap replacement only |
-
*NOTE:
Cartridge replacement excludes damage to Ceramic discs from pieces of copper tube, plastic, sand, dirt or thread tape etc.
Pull-out nozzle and hose 1-year parts only.
In addition to the guarantees under the Australian Consumer Law, Nero tapware warranty periods apply to products purchased after 1st December 2019
-
WARRANTY SHALL BE VOIDED FOR THE FOLLOWING REASONS:
Inability to provide proof of purchase or equivalent documentation
Products not installed by a licensed plumber. (Excludes Bathroom accessories – towel rails, shelves etc.)
Products not installed to relevant National Standards and State Regulations.
Products not installed in accordance with the manufacturer’s installation instructions
Tapware exposed to water pressures and or temperatures that exceed stated limitations as per the product installation instructions. Note: AS/NZS 3500, 1-2003 (clause 3.3.4) specifies 500KPA maximum water supply pressure at any outlet within a building for new installations.
Fitting of other devices to the outlet of tapware. E.g. Water filters
Fitting of Nero Taps non-approved in tap body or end of line water flow regulating devices
Products used for incorrect applications, non-potable water etc.
Damage as a result of obstructions due to inadequate flushing of system before use.
Service, repairs or non-standard replacement parts previously undertaken without NERO Taps written approval.
Damage to finishes by adhesives, sealant etc.
Damage to finishes that arise from installation or post-installation use
Failure to observe manufacturer’s care and cleaning instructions
Improper or abusive use of product, and/or damage resulting from misuse, accident or neglect
-
WARRANTY CONDITIONS
Nero tapware warranty covers the repair or, at its option, replace any goods which are defective through faulty workmanship or materials, free of charge and labour, within the first 1 years of the warranty.
The warranty period commences from the date of purchase or, for new buildings, the date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered. All claims are to be lodged at the point of purchase, whereby Sussex Taps After Sales Service Department will then be notified.
Nero tapware will not be liable for any subsequent claims of labour, additional products or parts associated with the alleged faulty product for work not approved in advance in writing by Nero tapware.
Should any warranty claim be made and service attended to by a Nero tapware authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Nero tapware reserves the right to charge a service fee for attending and/or any work carried out.
Nero tapware require adequate access to products, fittings and fixtures to undertake warranty repairs. Nero tapware will not be responsible for any consequential damage or costs where adequate access to product fittings and fixtures is not provided.
-
TAPWARE AND ACCESSORIES CARE AND CLEANING INSTRUCTION
Under no circumstances should you install tapware using acetone silicones.
Never use harsh detergents or abrasive cleaners, as these will scratch the surface.
To clean, use a soft cloth with warm soapy water to maintain the finish in perfect condition for a lifetime of use.
Use of wax-based furniture cream should be avoided as this can result in a build-up of deposits, which could detract from the appearance.
Gold and Rose Gold plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.
Note: This is a summary of the Nero tapware warranty offer for Australian installed products. Some additional terms and conditions may apply.
Nero tapware reserves the right to alter, or amend this warranty offer in writing at any time. Nero tapware reserves the right to provide minor components (eg. handles, aerators, buttons, dress rings, spindle/cartridges and seals) as ‘ Parts Only’ to the customer.
-
CONSEQUENTIAL LOSS
Nero tapware obligations under warranty are limited to the repair or, at Nero option, replacement of any products which are defective through faulty workmanship or materials. To the extent permitted by law, Nero tapware will not be liable for any loss to furniture, floor coverings, walls, fixtures or any consequential loss of any kind caused by any defect in the product components.
Full Warranty Details can be found here – https://nerotapware.com.au/warranty-policy/
