Shower Screen Replacement Perth: A DIY-Friendly Guide for Homeowners

If you’ve found yourself googling shower screen replacement Perth at 6am after another puddle appeared on the bathroom floor, you’re not alone. It’s one of those jobs we all put off until the leak, the foggy glass, or the door that won’t close properly forces our hand.

The first worry is usually the same: do I need to call a glazier? Is this going to cost me thousands? After 20-odd years helping Perth homeowners with their renos, I can tell you the answer to both is usually no.

A replacement shower screen doesn’t have to mean an expensive supply-and-install job. Our supply-only shower screens are built for DIY shower screen installation — most are within reach of any reasonably handy homeowner, or a quick job for your usual handyman.

In this guide, I’ll walk you through the signs your screen has had it, what’s involved in replacing it, what it actually costs, and how going supply-only saves Perth homeowners hundreds — sometimes well over a thousand dollars.

Signs It’s Time to Replace Your Shower Screen

Most people don’t think about their shower screen until something goes wrong. Then suddenly it’s all you can see — the leak, the mould, the door that won’t sit right. So how do you know when it’s time to stop patching it up and start fresh?

Here are the most common signs a shower screen replacement is on the cards:

• Cracked or chipped glass
• Persistent leaks onto the bathroom floor
• Failing seals or gaskets
• Mould between the glass and frame
• Foggy or permanently hazy glass
• Rusted or corroded frame
• Sticking, creaking, or misaligned doors

Cracks, Chips, or Loose Glass

This one isn’t up for debate. Even a tiny chip on toughened safety glass can spread without warning, and when toughened glass fails, it tends to fail all at once. That’s a serious safety risk, especially in a household with kids.

It’s also worth knowing that any shower screen installed before the early 2000s may not meet current AS1288 safety standards. If yours is that old and showing damage, replace it — it’s not a job to put off.

Leaks, Mould, and Failing Seals

This is the most common reason customers come and see us. Shower screen seals and gaskets harden over time, silicone perishes, and once water starts escaping the shower, mould follows close behind. You’ll see it in the grout, on the seals, and sometimes spreading across the bathroom floor.

A new seal can sometimes buy you another year or two on a relatively young screen. But if the screen is already 10+ years old, you’re throwing good money after bad. Replace the lot and start fresh.

Foggy, Hazy or Permanently Stained Glass

Perth’s hard water is brutal on shower glass. Over the years, calcium and soap scum etch into the surface and no amount of scrubbing will bring back the clarity. I’ve seen people try every cleaner under the sun — once it’s etched, it’s etched.

This is one of the most common reasons people replace a screen that’s otherwise still working fine. The screen’s not broken, it just looks tired.

Sticking Doors, Worn Hinges, or Rusted Frames

Sliding door rollers wear out, hinges loosen, and aluminium frames corrode where the silicone has failed. Some of this is fixable — a new roller set or hinge pin can buy you time. But if more than one thing is going at once, the screen is telling you it’s reaching end of life.

Outdated Style or Renovation Refresh

Sometimes nothing’s actually broken. The screen just looks dated. Wired glass, patterned obscure glass, heavy gold or chrome framing from the 80s and 90s — these instantly age a bathroom, even if everything else around them is modern.

Swapping an old framed screen for a clean semi-frameless or frameless screen can completely transform a bathroom without touching the tiles, the vanity, or anything else.

I did exactly this in one of our rental properties last year — pulled out a chunky gold-framed screen with patterned obscure glass that had been there since the early 90s, and dropped in one of our semi-frameless screens with clear glass and a black frame. Same tiles, same vanity, same everything else. The bathroom looked twenty years younger overnight, and the place re-let inside a week.

Repair vs Replace — Which One Makes Sense?

When something goes wrong, the temptation is to rip the whole thing out and start again. But that’s not always the right call. A quick honest assessment can save you a few hundred dollars — and as a customer-first business, I’d rather give you the straight advice than push you into a sale you don’t need.

When Repair Makes Sense

• A single failing seal or gasket on an otherwise sound screen
• Minor hinge tightening or sliding door roller adjustment
• Re-siliconing where the silicone sealant has perished but the glass and frame are still in good shape
• The screen is less than 5–7 years old

When Replacement Is the Smarter Move

• Cracked, chipped, or permanently stained glass
• Multiple problems at once (a leak, a sticking door, and mould all hitting at the same time)
• The frame is rusted or corroded through
• The screen is 10+ years old — repair costs add up fast on aging hardware
• You’re already updating the bathroom

In my experience, if you’re spending more than a couple of hundred dollars to patch it up, you’re better off putting that toward one of our replacement shower screens. You’ll get a better result, fewer headaches down the track, and the peace of mind that comes with a fresh install.

Can You Replace Just the Glass, or Do You Need the Whole Screen?

This is one of the most common questions we get in the showroom. The short answer? Usually the whole screen. I know that’s not what most people want to hear, but it’s the honest answer — and once you understand why, it actually makes the decision a lot easier.

The main issue is compatibility. The wall channels, brackets, and fittings on your existing screen are almost never going to match new replacement shower glass panels. Different manufacturers use different profiles, different hole positions, and different glass thicknesses. Even if you find glass that physically fits, getting it to seal properly against an old frame is a recipe for leaks down the track.

Glass thickness is another sticking point. A lot of older screens were made with 5mm or 6mm glass, while current Australian standards have most replacements at 6mm for framed screens and 10mm for frameless. So even matching the glass to the original spec often isn’t an option.

In most cases, pulling the old screen out and starting fresh is faster, cheaper over the long run, and gives you a far better result. A glass shower screen replacement done as a complete unit is also covered properly under warranty — mix-and-match jobs rarely are.

Why Our Supply-Only Approach Saves Perth Homeowners Money

Here’s something most homeowners don’t realise when they start looking into shower screen replacement in Perth: nearly every shower screen company in this city bundles supply and install together. That bundle typically adds $500 to $ 1,500 on top of the screen’s actual cost. We do things differently at Ross’s, and it’s the main reason our customers walk out paying a lot less for the same end result.

How Supply-and-Install Pricing Works

The standard Perth glazier model goes like this: you book a site visit; they come out and measure; you wait a few days for a quote; then a few weeks for a custom-made screen; then they come back to install it. By the time it’s all done, you’re typically looking at $1,500 to $3,000+ for a standard shower. The screen itself might only be a third of that — the rest is labour, custom manufacturing, and admin fees.

How Supply-Only Works at Ross’s

Our approach is simpler. We stock pre-made shower screens with built-in adjustment ranges that fit most standard Perth showers, so there’s no need to custom-make anything. You browse the range, pick what suits your space, and either you or your tradie handles the install.

• No site visit needed
• No custom manufacturing wait time
• Pick up from our Guildford showroom or have it delivered to Perth Metro for $100 flat
• Get a handyman in, use your builder, or DIY if you’re handy

If you’ve been searching shower screen replacement near me hoping to find a budget option, this is it.

Real Cost Comparison

Let’s put some real numbers on it. A typical Perth supply-and-install job for a standard shower will run you north of $2,000. Buy a complete shower screen from us (starting at $760), pay a handyman $200–$400 to fit it, and you’re looking at under $1,200 all-in. Same shower, same end result, $800 to $1,500 back in your pocket.

A customer came in last month after getting two quotes from local glaziers — both north of $2,400 for a fairly standard semi-frameless screen. He walked out with one of our replacement shower screens for $890, organised his usual handyman to fit it for $300, and saved himself well over a grand. Same screen, same finish, same outcome.

How Adjustable Shower Screens Fit Most Existing Openings

One of the first things people ask when they walk into the showroom is, “but my shower opening isn’t a standard size — will anything actually fit?” It’s a fair question, and it’s the reason a lot of homeowners assume they need to go down the expensive custom-made route. The good news? For the vast majority of Perth replacements, you don’t.

Why Adjustment Ranges Matter for Replacements

Our replacement shower screens are built with adjustment range factored in — typically up to 100mm of give on doors and panels. That means a single product fits a span of opening sizes, not just one exact dimension. So even if your opening is, say, 893mm wide rather than a clean 900mm, you’re covered.

This is a huge deal for replacement jobs specifically. Old showers are rarely perfectly square, walls aren’t always plumb, and openings can vary by 10mm or more from top to bottom. Adjustable replacement shower screen doors and panels handle all of that without breaking a sweat — no custom order, no four-week wait, no premium price tag.

Standard Sizes That Cover Most Perth Showers

Most Perth homes have shower openings that fall within a few common size ranges, and we stock screens to cover the lot. Walk into the showroom, and there’s a strong chance the screen you need is sitting on the floor, ready to go.

There are exceptions. Very narrow ensuites, oversized walk-in showers, unusual angles, or curved configurations may still need a custom solution. If you’re not sure where your shower sits, bring your measurements in or give us a call — the team can quickly tell you whether one of our stock screens will work or whether custom is the right path. Alternatively, read our post, Stock Shower Screens Vs. Custom Solutions to learn what’s right for you.

Choosing the Right Replacement Shower Screen

Once you’ve decided to replace, the next step is picking what’s right for your space. There are three main choices to think through: the style of screen, the door type, and the finish. For most replacements, the easiest path is matching what’s already there or stepping it up a notch (e.g. swapping an old framed screen for a fresher semi-frameless). If you want a deeper rundown across the whole topic, our ultimate shower screen buying guide covers everything in detail.

Framed, Semi-Frameless, or Frameless

A framed shower screen is the budget-friendly classic — aluminium framing all the way around the glass, traditional look, and the most cost-effective option. They’re solid, reliable, and a solid choice if you’re updating a rental or sticking to a tight budget.

Semi-frameless screens are the middle ground and easily our most popular replacement option. You get a cleaner, more modern look without the price tag of going fully frameless. There’s framing where it’s needed for support, but the door and exposed edges sit frame-free.

Frameless screens are the premium pick — thicker glass, no visible framing, and that high-end, custom feel. They cost more (the glass alone is heavier and more expensive), but the look is hard to beat. For a deeper dive, see our guide on frameless vs semi-frameless options.

Door Style: Sliding, Pivot, Hinged, or Bi-Fold

Door style mostly comes down to your space:

• Sliding doors are perfect for tight bathrooms where a swinging door would clip the vanity or toilet
• Pivot and hinged doors suit standard openings and give you the widest, easiest access
• Bi-fold doors are the answer for very narrow openings where neither sliding nor hinged will work

For most Perth replacements, the door style is dictated by the space rather than personal preference. Our guide on sliding, hinged or pivot doors walks through the trade-offs in more detail.

Glass Thickness and Safety

Glass thickness depends on the screen style. Framed and most semi-frameless screens use 6mm glass, while frameless screens use 10mm to handle the lack of framing support.

Every shower screen we sell is made from toughened safety glass that meets Australian Standard AS1288 — the standard that governs glazing in wet areas across the country. Don’t compromise on this. Cheap, non-compliant glass is a serious safety risk and won’t be covered by insurance if anything goes wrong.

Finishes That Match Your Bathroom

Finishes have come a long way. The classic chrome is still a solid choice, but matte black and brushed nickel have taken over as the popular picks for modern bathrooms. Brushed gold and gunmetal are also showing up more often.

The main thing is to match (or at least complement) your existing tapware. A chrome shower screen frame in a bathroom full of matte black taps will stand out for the wrong reasons.

What to Check Before You Order

Before you click buy, spend a few minutes on these checks. It won’t take long, and it could save you the headache of returns, delays, or finding out the screen you ordered doesn’t fit once it’s already arrived on your doorstep.

Measure the Opening Accurately

This is the one step people rush — and it’s the one that causes the most grief. Walls aren’t always perfectly plumb, so measure the width and height at the top, middle, and bottom of the opening. If the numbers vary, work with the smallest measurement. Also take note of where your tap or shower head fittings sit, as these can affect which screen will work in your space. For a full walkthrough, our how to measure a shower screen guide covers it step by step.

Check the Floor Type — Hob or Tiled?

Whether your shower base has a hob — that raised lip around the edge — or sits flush with a tiled floor makes a real difference to which screen will fit. Some screens rely on a hob to seal correctly and simply won’t work on a flat tiled floor. If you’re not sure what you’ve got, our team is happy to help you work it out before you order.

Inspect the Tiles and Waterproofing

I’ll be upfront here — if your tiles are loose, cracked, or you can see any sign of water damage around the old screen, fix that first. Installing a new screen over a failing waterproofing membrane will only make the problem worse. It’s worth getting it sorted before the new screen goes in.

The Replacement Process — What’s Involved

Replacing a shower screen is a half-day to full-day job for someone reasonably handy. It’s not a complicated trade job, but it’s not a quick fix either. Go in with realistic expectations, take your time, and it’s very manageable.

Removing the Old Screen

Start by cutting all the old silicone with a sharp blade before you touch a single screw. Skipping this step risks pulling tiles off the wall. Then:

• Remove the door first — lift sliding doors off the track, or unscrew pivot and hinge pins on hinged doors
• Unscrew wall channels from top to bottom, going slowly to protect the tiles
• Lift glass panels out carefully — frameless panels can weigh 30kg or more, so have a second set of hands ready
• Once everything is out, scrape off all old silicone residue and clean the surface with a silicone remover before anything new goes up

Installing the New Screen

• Test-fit everything before you drill a single hole
• Mark and drill carefully using a tile-safe drill bit
• Fix the wall channels first, then fit the doors and panels following the included instructions
• Apply a fresh bead of sanitary-grade silicone sealant to all wet-area joints
• Leave the silicone to cure for a full 24 hours before using the shower — this step isn’t optional

DIY or Get Help?

I’ll be straight with you. If you’ve done a bit of DIY before and you’re reasonably confident, shower screen replacement in Perth is a manageable weekend job. The part most people underestimate is the silicone seal — get that wrong, and you’ll have leaks. If you’re not confident with it, a handyman will typically charge $200–$400, and it’s genuinely money well spent.

For those who want to give it a go themselves, our DIY shower screen installation guide walks you through the full process.

Cost of Replacing a Shower Screen in Perth

Cost is usually the first thing running through a homeowner’s head — and fair enough. A shower screen replacement is not a small purchase, so let me give you real numbers rather than a vague “it depends.”

Ross’s Shower Screen Pricing

At Ross’s, replacement shower screens start at genuinely competitive prices. Here’s a rough guide:

Product	Starting Price
Glass shower panel	From $200
Shower door	From $300
Complete shower screen	From $760

These are starting prices — the final figure will vary depending on size, finish, and frame style. For a full breakdown, our guide on shower screen costs covers the range in more detail.

Installation Cost If You Use a Handyman

If you’d rather leave the fitting to someone else, Perth handymen and glaziers typically charge around $60–$120 per hour, and most shower screen installs take two to four hours. Budget $200–$400 for a standard fit.

Total Cost vs Supply-and-Install

Here’s where the numbers get interesting. A complete screen from Ross’s plus handyman installation comes in under $1,200 for a standard shower. A supply-and-install quote from a Perth glazier for the same job typically runs $2,000–$3,000 or more. That’s a saving of $800–$1,800 — just by sourcing the screen yourself and using a handyman for the fit. The shower screen replacement cost adds up quickly when someone else supplies the product, too.

Why Choose Ross’s for Your Shower Screen Replacement in Perth

Ross’s is the straightforward choice for Perth homeowners who want a quality screen at a fair price, without the markup that comes with a full supply-and-install quote.

We’ve been a family-owned Perth business since 1973, and our team knows these products inside out. Our range covers shower screens to suit any standard Perth shower, and every screen is designed to be DIY-friendly with built-in adjustment ranges that take the stress out of fitting. If you’d rather see the screens in person before buying, come into our Guildford showroom — the team is always happy to talk through your options and point you in the right direction.

For those who prefer to shop online, we offer a flat-rate $100 delivery to Perth Metro and a 14-day money-back guarantee. If it doesn’t fit or doesn’t suit, you can return it. Browse our range of showers and find the right one for your space.

Shower Screen Replacement FAQs

Here are the questions we hear most often from Perth homeowners replacing their shower screen.

Conclusion

Replacing a shower screen in Perth doesn’t need to cost $2,000 or more. By going supply-only and fitting the screen yourself — or bringing in a handyman for a few hundred dollars — most Perth homeowners can get the job done for well under $1,200. That’s a saving worth having.

Whether you’re a confident DIYer or planning to hand the installation off to someone else, the process is straightforward when you start with the right screen. Our DIY-friendly designs take the guesswork out of fitting, and our team is always on hand if you need a hand choosing.

Browse our full range of showers online, or come into our Guildford showroom for a chat. We’ll help you find the right screen for your space and your budget.